您的位置: 标准下载 » 国内标准 » 行业标准 »

GA 881-2010 警用轻型移动式路障车

作者:标准资料网 时间:2024-05-20 06:08:56  浏览:8097   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:警用轻型移动式路障车
英文名称:Police traveling road-block light evhicle
中标分类: 综合 >> 社会公共安全 >> 警用装备与器械
ICS分类: 道路车辆工程 >> 专用汽车
发布部门:中华人民共和国公安部
发布日期:2010-08-10
实施日期:2010-09-01
首发日期:
作废日期:
主管部门:公安部特种警用装备标准化技术委员会
提出单位:公安部装备财务局
归口单位:公安部特种警用装备标准化技术委员会
起草单位:公安部装备财务局、公安部特种警用装备标准化技术委员会秘书处、郑州日产汽车有限公司
起草人:王树林、凌建寿、王梅、宋向阳、孙丹
出版社:中国标准出版社
出版日期:2010-09-01
页数:12页
适用范围

  本标准规定了警用轻型移动式路障车的术语和定义、代号、技术要求、试验方法、检验规则、标志、运输与贮存。本标准适用于采用国家允许生产和销售的汽车整车或二类底盘改装的警用轻型移动式路障车。

前言

没有内容

目录

没有内容

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T6461 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级
GB7258 机动车运行安全技术条件
GB8108 车用电子警报器
GB/T10125 人造气氛腐蚀试验 盐雾试验
GB/T12678 汽车可靠性行驶试验方法
GB13954 警车、消防车、救护车、工程救险车标志灯具
GA524 2004式警车汽车类外观制式涂装规范
GA668-2006 警用防暴车通用技术条件
GA876-2010 警用车辆产品分类及型号编制规则
QC/T252 专用汽车定型试验规程
QC/T413 汽车电气设备基本技术条件

所属分类: 综合 社会公共安全 警用装备与器械 道路车辆工程 专用汽车
下载地址: 点击此处下载
基本信息
标准名称:磨边装饰镜
中标分类: 轻工、文化与生活用品 >> 工艺美术品与其他日用品 >> 其他日用品
替代情况:被QB/T 1102-2006代替
发布日期:1900-01-01
实施日期:1995-08-01
首发日期:1900-01-01
作废日期:2007-08-01
出版社:中国轻工业出版社
出版日期:1995-08-01
页数:7页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 轻工 文化与生活用品 工艺美术品与其他日用品 其他日用品
Product Code:SAE J2197
Title:Hfc-134a (R-134a) Service Hose Fittings for Automotive Air-Conditioning Service Equipment
Issuing Committee:Interior Climate Control Committee
Scope:This SAE Standard covers fittings intended for connecting service hoses, per SAE J2196, from Mobile Air-Conditioning Systems to service equipment such as manifold gauges, vacuum pumps and air-conditioning charging, recovery and recycling equipment (Figure 1).Due to similarities between English and metric thread sizes a single, unique ACME thread fitting is specified. This fitting was recommended by the Compressed Gas Association (CGA), Connection Standards Committee Task Force as one which could be qualified to meet their requirements for use and safety in a time frame consistent with the introduction of R-134a. It was selected because its unique design would reduce the likelihood of cross-treading service hoses on R-12/R-134a refrigerant storage containers and service equipment.The high and low pressure hose in SAE J2196 requires the charge coupling (used to connect service hoses to vehicle access ports) to be an integral part of the hose assembly. To allow removal of the hose from the coupling for hose replacement only, a two-piece construction with a wrench tight connection is permitted. Specifications covering this fitting are provided.